Steel Angle of Chi sandwich panel roll forming machine
roll forming machine
Nanjing Shanduan CNC Machine Tool Co., Ltd is one of the Top 3 press brake and shearing machine in China, which specializing in manufacturing and marketing of press brake,shearing machine,press machine, square duct production line LINE5,4,3,2,1;spiral duct machine, locking forming machine;folding machine,plasma cutting machine, power press,ironworker,hydraulic notching machine, beading machine,flange forming machine,shearing machine & press brake,Blade/Mold, etc.
| Company Name (manufacturer): Nanjing Shanduan CNC Machine Tool Co., Ltd. |
| Brand: YSDCNC |
| Address: MINGJUR INDUSTRIAL CONCENTRATION DISTRICT,SHIQIU TOWN,LISHUI AREA,NANJING,JIANGSU |
| Tel:+86 025-57262305 Phone:+86 18851629789 |
| Website: www.ysdcnc.com |
High-speed promise to cut off the C type steel belongs to efficient economic cutting surface profiles (and other cold bending thin-wall steel, pressed steel plate, etc.), due to the reasonable section shape, they can make the steel better function, improve the ability of bearing and cutting.Unlike the common type, the h-section steel wing embroidery is widened, and the inner and outer surfaces are usually parallel, making it easy to connect with other components with high-strength laurel.Its size makes a reasonable series, the model is complete, facilitates the design selection.In China, the C type steel-cutting machine has gone through many stages of change, from non-replaceable to replaceable, and then adopted many different methods on the half set of the change.
High-speed automatic cutting c-beam machine is mainly composed of passive feeding, feeding frame base, feed import platform, leveling device, molding host, punching device, cutting device, hydraulic station, computer control cabinet and so on several parts.
Comparison between high speed non - pole cutting machine and flying saw cutting
1. Save electricity and energy (save power by 15 degrees per hour)
2. Less length waste (about 5mm at the flying saw blade, loss after cutting;The anode cuts off about 8mm of waste and can be disposed of as waste.
3. Non-polar cut-off non-noise pollution, no dust, safety and durability ii.
4. The C type steel machine without pole cutting does not need to change the mold, arbitrarily cutting, saving time and effort.
5. More and faster mold changes, so there is no need to store a large number of molds.
| No |
Item |
Parameter |
|
| motor drive |
hydraulic drive |
| 1 |
host volume |
9000mm×1500mm×1300mm |
| 2 |
Main motor power |
|
22KW |
| 3 |
Molding line number |
12 line |
| 4 |
Molding shaft |
diameter80mm,45# Aluminium processing |
| 5 |
thickness of the plate |
20mm Side wheel with protective cap to insulate strip steel oxide skin |
| 6 |
Load Chain Diameter |
2 inch |
| 7 |
host big |
300H steel |
| 8 |
Compressible thickness |
1.0-3.0mm |
| 9 |
PLC
computer control |
PLC use the tada brand |
| 10 |
cut mode |
Automatic hydraulic cutting |
| 11 |
Shear blade |
Cr12HWJK High abrasion resistant tool plate |
| 12 |
Hydraulic pump station power |
22KW/ hydraulic drive |
| 13 |
Forming speed |
|
18-20m/min |
| 14 |
Dimension error |
±1-2mm |
Random tools/documents:
| Serial No. |
Name |
Quantity |
Remark |
| 1 |
Main unit |
1 |
Including one set of upper and lower die, front plate holder and foot switch |
| 2 |
Grease gun |
1 |
|
| 3 |
Button key |
2 |
|
| 4 |
Key to door lock |
2 |
|
| 5 |
Product instructions |
1 |
|
| 6 |
certificate of quality |
1 |
|
| 7 |
Packing list |
1 |
|
| 8 |
Foundation bolt |
4 sets |
Including nuts and washers |
| 9 |
O-type sealing ring |
16 |
|
roll forming machine
Audited Supplier 
){kind=link}
){kind=link}